○One-of-a-Kind and handmade by me (Reiki Master)
○Measures 3 inches in diameter
○Four-layer thermal dye-sublimation laminated sticker
○Durable, waterproof and scratch-resistant
 ○Supercharged, programmed with positive energy, and infused with Reiki energy
 
 
 
💥STICKER APPLICATION TIPS:💥
 
1. Surface Preparation
​--Clean thoroughly: Wipe the surface with rubbing alcohol (isopropyl alcohol) or soap and water. Avoid glass cleaners (like Windex), as they can leave a residue that interferes with the adhesive.
​--Dry completely: Ensure the surface is 100% dry before applying. Moisture trapped under the adhesive will cause bubbling and premature peeling.
​--Temperature matters: Apply the sticker at room temperature. Extreme cold makes the adhesive brittle, while extreme heat can cause the vinyl to stretch during application.
 
​2. The Application Process
​--Use the center-out method: Peel the backing and place the center of the sticker down first. Smooth it outward toward the edges using your thumb, a credit card, or a felt squeegee. This pushes trapped air out and prevents bubbles.
​--Seal the edges: Pay extra attention to the perimeter. Press firmly along the entire edge to activate the pressure-sensitive adhesive and ensure the laminate layer completely seals out moisture. 
--Let it cure: Allow the adhesive to cure for 24 to 48 hours before exposing the sticker to heavy moisture, car washes, or extreme outdoor elements.
 
​3. Surface Selection
​--Stick to smooth materials: These stickers adhere best to glass, smooth plastics, polished metals, and finished wood.
​--Avoid heavy textures: Highly textured plastics, powder-coated metals, or fabric will limit the adhesive's contact points, causing the edges to lift over time.